مشاركات عشوائية

How To Drive a Car on Hills and Slopes

Driving a vehicle at the start is one of the most difficult things a driver learns in driving vehicles, in addition to the need to master it well, regardless of the type of vehicle; Whether it is a motorcycle, a regular car, a truck or something else, and although this differs according to the type and age of the vehicle, the driver must, when driving on the verge of checking many things in preparation for the launch, and in this article we will learn how to drive the car on the verge of a normal transmission , and automatic transmission, in addition to how to secure the car when stopping on the turn.

Car is Driven On a Manual Transmission

The implementation of driving on an incline requires a number of things that must be confirmed and practiced correctly in order to avoid the car reversing and the occurrence of collisions, etc., and the following is the correct way to drive on an incline using a car with a manual transmission:

  1. Lower the clutch to the ground, then put the first gear of the manual transmission, while keeping the handbrake activated.
  2. Gently press the accelerator pedal while raising the clutch to the top until the engine jolt point is reached. The driver will know this point when the engine sound changes and the feeling that the car starts moving safely.
  3. Ensure the safety of the road and pedestrians, in addition to checking the mirrors well.
  4. Release the handbrake while letting the clutch vibrate slightly until the car moves forward slowly.
  5. Gradually pressing the accelerator pedal while slowly lifting the clutch up, and then the car will move gradually on the starting point.

Note: It is possible to change gears from the first to the second while the car is moving on the uphill, but it is advised when driving on the uphill to stay at a low speed to ensure reaching the top of the uphill with sufficient force.

Drive Car On an Automatic Transmission

There are a number of steps that must be followed to drive a car with an automatic transmission on a starting point, and they are as follows:

  1. Ensure that the car's gear is set to D.
  2. Hold the handbrake and press the release button in it while keeping it raised (activated).
  3. Press the accelerator pedal slightly, as the car will then start trying to move.
  4. Ensure the safety of the road and pedestrians, in addition to checking the mirrors well.
  5. Lower the handbrake, and make sure to re-lift it in case the car is reversed.
  6. Gradually depress the accelerator pedal to increase the car's speed and climb to the top perfectly.

Car Insurance When Stopping on Turn

Parking a car on a starting point is one of the most difficult and dangerous types of parking while the car is not perfectly secured, as there are many risks such as rolling over and causing accidents. To avoid all of this, the following procedures must be adhered to:

  1. Follow the rules of parking used in any other place, such as making sure of the area around the car, and the space available for parking.
  2. Make sure to leave a sufficient distance between the car and the surrounding cars when parking to facilitate their exit, in addition to making sure to put the gear on the first gear if the transmission is manual, and the P position if the transmission is automatic.
  3. Using the handbrake and lifting it to ensure that the car does not roll out of position.
  4. Rotating the wheels of the car to ensure that it does not travel a long distance if it rolls, as this is done by directing the wheels towards the sidewalk when parking in a manner facing the slope, and directing them against the sidewalk if the parking is in the direction of ascending, then after that the driver can turn off the engine.

Post a Comment

0 Comments